Plastic Cabinets

Plastic Cabinets


MONO-CYCLONE TYPE POWDER COATING ANTISTATICK PVC SPEED COLOR CHANGE BOOTH WITH AFTER FILTER

WORKING PRINCIPLE

Consists of powder booth, cyclone group and after-filter system. The system is connected with each other air ducts. Base of the booth is inclined along the cabin at the bottom, allowing the powder to be sucked easily by the air movement created by the suction fan. Paint particles are collected in the cyclone tank, smaller particles goes into the after-filter unit. Coating collected in the cyclone can be reused again. Particles collected at the after filter unit cannot be used due to small particles collects here and cannot be charged electro statically.

CYCLONE

Powder coating particles moving by the ventilator suction movement enters the cyclone using air ducts and collects in the powder tank as a result of friction and gravitational force. In this systems powder is recycled at the cyclone tank where can be recovered manual or automatically.

AFTER-FILTER UNIT

Suction fan is mounted at the end of system, located on the after-filter unit in an insulated cabin that maintains minimum level of noise. Air movement generated by the fan brings smallest powder particles here that are filtered in this unit. Filters are cleaned as a result of the automatic cleaning system consist of solenoid valves and pressurized air system located here. Finally clean air is given back into the workshop area.

ADVANTAGES

Fast and easy color change

Efficiency 97-98%

 

4.1. TECHNICAL DETAILS

PVC POWDER BOOTH

Inner Dimensions

Width       : 2500 mm

Length     : 6500 mm

Height     : 3000 mm

 

Body Material          : PVC ANTİSTATİCK SHEET

Lighting                   : 4 Pcs of 2x40W Fluorescent

CYCLONE

Nos                         : 1 Pcs

Body material          : 1,5mm/2mm GALVANİS STEEL SHEET

Powder Hopper      : 1 Pcs -50 lt.

Powder recovery    : Automatic

 

Air-ducts between the booth and the cyclone are made from GALVANİS STEEL

AFTER-FILTER

Body Material          : 1,5mm / 2mm Powder coated CRS sheet

Fan                         : 12.000 m³/h 15KW 50Hz

Filters                      : 11 Pcs Ø320×600 Aluminized polyester filter media

Solenoid Valves      : 11 Pcs  ¾” 220V 10W

Waste powder hopper: 1 Pcs -30 lt.

 

Pressurized air need: 300lt/min, 6 Bar – Dry air

 

49,1ted on the cabin and the internal cabling has been made. The control panel consists of panel elements with brands SCHNEIDER ELECTRIC, ABB and equivalent.

INVITATION November 20-23

XVII INTERNATIONAL INDUSTRIAL FORUM
2018

KYIV, UKRAINE International Exhibition Centre
15 Brovarsky Ave. 
Invitation
close-link